model KVE in a stainless steel housing
- For the continuous separation of gas/liquid mixtures
- Volume can be expanded using modular technology
- Water-Trap-Cartridge (optional) prevents condensate break-through
-Made in Germany
- Certificates: ATEX 2014/34/EU
The KVE model condensate pre separator is designed for the continuous separation of gases and liquids. The
measuring gas containing condensate is fed via 2 gas inputs (GAS-IN) into the condensate pre-filter unit. Centrifugal
force is applied and the heavier condensate collects in the bottom of the container. The condensate output
(CONDENSATE-OUT) can then be used to drain it off.
For large condensate quantities, the condensate output 2 (CONDENSATE 2) can also be used.
The lighter measuring gas, on the other hand, is supplied to the top of the container (GAS-OUT).
A Water-Trap-Cartridge (Option) may optionally be integrated. Its semi-permeable diaphragm prevents a condensate
break-through. The diaphragm separates gases from water, weak acids and dust. The diaphragm is not suitable for
use with aromatic hydrocarbons, e.g. oils and fuels in refinery process gases.
|Scope of delivery:||Housing, Water-Trap Cartridge (option), wall assembly bracket (option)|
|Materials used:||Stainless steel, type 1.4301, FKM (O-ring)|
|Operating pressure:||0 - 12 bar|
|Gas flow:||0 - 10.000 l air/h|
|Pressure drop at 1.000 l air/h:||approx. 12 mbar|
|Pressure drop at 5.000 l air/h:||approx. 30 mbar|
|Operating temperature:||+5°C - +90°C|
|Housing volume:||750 ml|
|Housing dimensions:||Diameter 80 mm, length 300 mm|
|GAS-IN ¼“ G - inside thread
GAS-OUT ¼“ G - inside thread
KONDENSAT-OUT 1 ¼“ G - inside thread
KONDENSAT-OUT 2 ¼“ G - inside thread
|Assembly:||Wall mounting with assembly bracket (option)|
|Gas explosion proof ATEX:||EX II 2G Ex h IIC Gb -10°C ≤ Ta ≤ +80°C attestation EPS 19 ATEX 2 187 U|
|Dust explosion proof ATEX:||EX II 2D Ex h IIIC Db -10°C ≤ Ta ≤ +80°C attestation EPS 19 ATEX 2 187 U|
|Language operating instructions:||German and English (included in the scope of delivery)|
|Spanish, Italian, French, Russian upon request|
|Certificates/attestations:||3.1 material quality certificate, NACE-MR0175-98 (on request)
certificate of conformity ATEX 2014/34/EU
|Water-Trap Cartridge (option)|
|Water pressure membrane:||0 - 1 bar|
|Effective filter area:||550 cm2|
|Diaphragm pore size:||< 0,1μm|
|Materials used:||PTFE, PP, SUN-C coating|
|Note:||The Water-Trap Cartridge is not suitable for use with aromatic
hydrocarbons, e.g. oils and fuels in refinery process gases
For operation in potentially explosive ambience:
The products can be used in explosive ambience of Zone 1, Zone 2, Zone 21 und 22.
Allowed the explosion classes IIA, IIB und IIC.
The products have no self-heating during intended operation and can be used in dependency of the maximum permissible media temperature for gases of the temperature class T6.
|Condensate pre separator, model KVE,material stainless steel, in accordance with technical specifications||KVE|
|Condensate pre separator, model KVEKAWT, material stainless steel, in accordance with technical specifications. With integrated Water-Trap-Cartridge||KVEKAWT|
|1 stainless steel bracket for wall mounting||MONWIWT2048|
|1 O-ring FKM||OR2048FKM|