Menu

Water-Oil-Trap with extra fine particle filter

model WT 20.83 E XL in a stainless steel housing

- Advantageous combination of filter + membrane

- With Dual-Membrane-System® to stop of water, acid, alkali, liquid hydrocarbons and extra fine dust
 

-“Easy Change System” of the inner diaphragm After removing the cover screws,
the diaphragm can be replaced quickly and effortlessly. It is not necessary to remove the screw connections

- All gas connections on the lower part of the housing

 

 

- Built-in XL filter for particle and permanent liquid deposition

- Bypass function built-in

- Made in Germany  

- Certificates: 3.1 material quality certificate, NACE-MR0175-98, ATEX 2014/34/EU

 

Functional description:

The Water-Oil-Trap is used as a protection of gas analysers from liquids and particles. A bypass connection is integrated.

The Water-Oil-Trap is installed directly in front of the gas analyser in the tubing. If the upstream gas processing (cooler, perestaltic pump, dust filter and the like) fails, the Water-Oil-Trap uses its semipermeable diaphragms with SUN-C oil-repellent coating to protect the gas analyser. The diaphragm separates gases from condensate and extra fine dust. The Water-Oil-Trap is designed as a bypass filter. The main gas flow can be discharged again via the bypass; a partial current (1:2 to 1:20) will be provided to the analyser. This results in quick response times of the analyser. Condensate/oil carried along is also discharged via the bypass. The aligned incoming flow of the diaphragm has another additional self-cleaning effect. An additional XL coalescence filter is integrated and helps to deposit oil and aerosols. An alarm is indicated via the upstream variable area flowmeter with monitoring (refer to sample applications).

The Water-Oil-Trap is also known as a “Police filter”

Coalescence effect:

Diagram as bypass filter for deposition of liquids:

Technical specifications:

Scope of delivery: Housing complete with membrane, filter and, assembly bracket
Water pressure membrane: 0 - 2,0 bar with DMS (Dual-Membrane-System®)
Oil pressure (10W40) membrane: 0 – 0,3 bar with DMS (Dual-Membrane-System®)
Gasoline (ROZ 95) Membrane: 0 – 0,2 bar with DMS (Dual-Membrane-System®)
The Dual-Membrane-System® of the Water-Oil-Traps is a novel membrane system. Condensates such as water, acid, alkali and liquid hydrocarbons, for example, oils and gasolines in refinery process gases are retained.
The design is subject to a legal protection of registered designs (registered number 20 2016 100 476)

Operating pressure for gas:

50 bar (for optional 220 bar, refer to model WT 20.83 E XL HD)

Gas flow:

0 - 180 l air/h

Pressure drop at 60 l air/h:

approx. 20 mbar

Pressure drop at 120 l air/h:

approx. 40 mbar

Pressure drop at 180 l air/h: approx. 60 mbar

Diaphragm pore size:

< 0,1μm

Operating temperature:

- 20°C to +190°C

Effective filter area:

30 cm2

Housing volume: 30 ml

Materials used:

Stainless steel type 1.4571, FKM (Viton), PTFE with SUN-C coating

Housing dimensions:

Diameter 100 mm, height 60 mm

Gas connections:

GAS-IN 1/4“ NPT inside thread
BYPASS 1/4“ NPT inside thread
GAS-OUT 1/8“ NPT inside thread

Assembly: Wall mounting with assembly bracket (included in scope of delivery)
Assembly advice: Installation of the bypass is recommended. Consider the max.membrane pressures if no bypass is possible

Language operating instructions:

German and English (included in the scope of delivery)

 

Spanish, Italian, French, Russian upon request
Certificates:
(Please specify when ordering)
3.1 material quality certificate, NACE-MR0175-98, ATEX 2014/34/EU

 

 

Sample application: Natural gas analysis (fuel value determination) with sample preparation:

Order numbers:

protection of utility patents DE 20 2016 100 476

Item Item number
Water-Oil-Trap WT 20.83 E XL. Material stainless steel 1.4571 (316 Ti), as per technical specifications. O-rings FKM (standard) WT2083EXL
Water-Oil-Trap WT 20.83 E XL. Material stainless steel 1.4571 (316 Ti), as per technical specifications. O-rings PTFE WT2083EXLORPTFE
Water-Oil-Trap WT 20.83 E XL. Material stainless steel 1.4571 (316 Ti), as per technical specifications. O-rings FFKM WT2083EXLORFFKM
Water-Oil-Trap WT 20.83 E XL Material Hastelloy HC 22  

Spare parts:

 
Spare diaphragms consisting of white diaphragm, grey diaphragm and indicator plate MEM2083
Supporting sieve STUESI2083
Set (5 units) of coalescence filter KF2083XL
Set of O-rings FKM Viton (standard), green OR2083FKM
Set of O-rings PTFE, white OR2083PTFE
Set of O-rings FFKM, black OR2083FFKM

 

Note: The standard product is equipped with FKM O-rings.


PreviousPage Model WT 20.83 PVDF XL << - NextPage >> Model WT 20.83 E - TOP