Menu

Particle and coalescence filter

model PC 1410 E in a stainless steel housing

- One body two filtermethodes
Separation of liquids - particle filter


- Less space is requirement horizontal mounting
- Self-cleaning via bypass connection
- Can be used up to 350 bar and 200°C
- Gas connections on the body sub frame
- “Easy-Filter-Change System” Simple change of filter element from the front side
It is not necessary to remove the screw connections
- To disconnect fittings is not necessary!

- Made in Germany  
- Certificates: 3.1 material quality certificate, ATEX 2014/34/EU, Helium leakage tested

 

 

 

 

 

Functional description:

The PC 1410 model is used in the gas processing during the process gas analytics. The horizontal installation position allows less space requirement. Thanks to different filter elements, gases/liquids can be filtered (particle filter function) or liquids/aerosols can be deposited (coalescence filter function). All the gas connections have been provided for this. The filter housing can be rotated by 360° such that all the connection variants of the gas inlets and gas outlets are possible. The filter element is exchanged in a very service-friendly manner from the front side of the filter. A fussy removal of the screw connections is no longer necessary as all the gas connections are located on the firmly mounted filter base. The filter element is blocked by a retaining screw and thus cannot fall out inadvertently. The possibility of connecting a bypass is provided.

Comparison of the traditional filter technology with the new SUN-Control-Analytik filter

Technical specifications:

Scope of delivery: Housing, retaining screw for filter element, O-ring FKM (Viton) assembly bracket (optional), filter element (optional)
Materials used: Stainless steel type 1.4571, FKM (Viton), silicate glass (filter element), Duran glass (only D-models)
Wall mounting bracket (option): Stainless steel type 1.4301
Operating pressure: 0 - 350 bar. With Duran glass, 0 - 5 bar (till +25°C), 0 - max. 4 bar (till +80°C)
Gas flow: 0 - 1000 l air/h
Pressure drop at 100 l air/h: approx. 5 mbar
Pressure drop at 200 l air/h: approx. 10 mbar
Flow rate of the liquid: 400 l water/h at 1 bar pressure
Flow rate of the liquid: 500 l water/h at 2 bar pressure
Operating temperature: - 20°C - +200°C (higher temperatures on request)
With Duran glass: - 5°C - +80°C
Housing dimensions: Diameter 60 mm, length 100 mm
Housing volume: 35 ml
Effective filter area: 70 cm2
Gas connection 1: ¼“ NPT inside thread (filter element exterior)
Gas connection 2: ¼“ NPT inside thread (filter element interior)
Gas connection 3: ¼“ NPT inside thread (filter element exterior)
Gas connection 4: ¼“ NPT inside thread (filter element exterior) (G-thread upon request)
Assembly: - Wall mounting using retaining bracket (optional)
- Front panel mounting using retaining bracket (optional)
Gas explosion proof ATEX: EX II 2G Ex h IIC Gb -20°C ≤ Ta ≤ +200°C attestation EPS 19 ATEX 2 178 U
Dust explosion proof ATEX: EX II 2D Ex h IIIC Db -20°C ≤ Ta ≤ +200°C attestation EPS 19 ATEX 2 178 U
Helium leakage test: 2 x 10-9 mbar I/s
Language operating instructions: German and English (included in the scope of delivery)
  Spanish, Italian, French, Russian upon request
Certificates/attestations:
 
3.1 material quality certificate, NACE-MR0175-98, certificate of conformity ATEX
2014/34/EU, Helium leakage test attestation

 

For operation in potentially explosive ambience:

The products can be used in explosive ambience of Zone 1, Zone 2, Zone 21 und 22.
Allowed the explosion classes IIA, IIB und IIC.
The products have no self-heating during intended operation and can be used in dependency of the maximum permissible media temperature for gases of the temperature class T6.

Helium leakage test:

The product line has been subjected to a helium leak test. Single attestation on request.

SUNOX100-process

Oil and grease-free products for applications with 100% oxygen (on request)

Order numbers:

Filter housing with filter top made of stainless steel:

Article Article number
Filter housing, material stainless steel 1.4571 (316 Ti), filter top made of stainless steel, with retaining screw for filter element, with O-ring made of FKM (Viton), without filter element, without assembly bracket PC1410E
Filter housing, material stainless steel 1.4571 (316 Ti), filter top made of stainless steel, with retaining screw for filter element, with O-ring made of PTFE, without filter element, without assembly bracket PC1410EORPTFE
Filter housing, material stainless steel 1.4571 (316 Ti), filter top made of stainless steel, with retaining screw for filter element, with O-ring made of FFKM, without filter element, without assembly bracket PC1410EORFFKM
Filter housing material Hastelloy HC 22 or 1.4462-Super Duplex on request

 

Filter housing with filter top made of Duran glass:

Article Article number
Filter housing, material stainless steel 1.4571 (316 Ti), with filter top made of Duran glass, with retaining screw for filter element, with O-ring made of FKM (Viton), without filter element, without assembly bracket PC1410ED
Filter housing, material stainless steel 1.4571 (316 Ti), with filter top made of Duran glass, with retaining screw for filter element, with O-ring made of PTFE, without filter element, without assembly bracket PC1410EDORPTFE
Filter housing, material stainless steel 1.4571 (316 Ti), with filter top made of Duran glass, with retaining screw for filter element, with O-ring made of FFKM, without filter element, without assembly bracket PC1410EDORFFKM
Filter housing material Hastelloy HC 22 or 1.4462-Super Duplex on request

 

Note:
-The standard product is equipped with FKM O-rings. For additional information about O-rings, refer to “Informations”.
-PTFE O-rings for single use only
Note: The PC 1410 model has 4 gas connections. If only two are used e.g. when using the particle filter (GAS-IN and
GAS-OUT), two blind plugs will be required. If you additionally connect a bypass, only one blind plug is necessary in
that case.
Please adhere to this in your next order
Ordering aid: what do I need for a complete filter?
1. Filter housing
2. Filter element
3. Assembly bracket (you can also use your own system)
4. Blind plug (the filter housing has 4 connections)

Filter elements:

Article Article number
Set (5 units) of filter elements for particle filtration, Material borosilicate micro glass fibres, pore size 0.1 μm, deposition rate 99.999% FEPPC1410
Set (5 units) of filter elements for coalescence application (removal of oils and aerosoles) and particle filtration. Material borosilicate micro glass fibres, pore size 0.1 μm, deposition rate 99.999% FECPC1410
1 unit of filter element for particle filtration, Material PTFE-porous, pore size 1 μm FEPTFE1PC1410
1 unit of filter element for particle filtration, Material PTFE-porous, pore size 10 μm FEPTFE10PC1410
1 unit of filter element for particle filtration, Material PTFE-porous, pore size 25 μm FEPTFE25PC1410
1 unit of filter element for particle filtration, Material PTFE-porous, pore size 50 μm FEPTFE50PC1410
1 unit of filter element for particle filtration, Material PTFE-porous, pore size 100 μm FEPTFE100PC1410
1 unit of filter element for filtration of liquids made of stainless steel 1.4404 pore size 1 μm FESS1PC1410

1 unit of filter element for filtration of liquids made of stainless steel 1.4404 pore size 10 μm

FESS10PC1410
1 unit of filter element for filtration of liquids made of stainless steel 1.4404 pore size 25 μm FESS25PC1410

 

Note: Further pore sizes on request.

Options and spare parts:

Article Article number
1 unit of blind plug made of stainless steel, for locking the unused gas connection VSPC1410 E
1 unit of assembly bracket made of stainless steel 1.4571 for wall mounting MONWIWAMOPC1410
1 unit of assembly bracket made of stainless steel 1.4571 for front panel installation MONWIFROPPC1410
Crash ring made of Plexiglas for Duran glass filter upper part BSPC1410
1 unit of filter upper part made of Duran glass FODGPC1410
1 unit of O-ring FKM (Viton) standard, color green ORPC1410FKM
1 unit of O-ring PTFE, color white ORPC1410PTFE
1 Stück O-Ring FFKM, color black ORPC1410FFKM

 

Note: The standard product is equipped with FKM O-rings

Options:

Assembly bracket made of stainless steel for wall mounting

Item number: MONWIWAMOPC1410

Assembly bracket made of stainless steel for front panel installation

Item number: MONWIFROPPC1410

Crash ring made of Plexiglas for Duran glass filter upper part


Item number: BSPC1410
- If the glass breaks, the crash ring offers personal protection
- Pressure relief above 360° gap between round component


 

PreviousPage (no previous) - NextPage (no next) - TOP